How to Update MT Card to the Latest Hardware Ver1.3 & Software Ver1.2

The mt-card released the latest hardware Ver1.3 & software Ver1.2. This post aims to show you how to update MT-card to the latest hardware Ver1.3 & software Ver1.2 via picture presentation. You can buy the latest version mt-card (without update) online before beginning.

Steps

  1. Image titled Update MT Card to the Latest Hardware Ver1.3 & Software Ver1.2 Step 1
    1
    Download latest mt-card hardware ver1.3 and software ver1.2.[1] Then extract the zip file.
  2. Image titled Update MT Card to the Latest Hardware Ver1.3 & Software Ver1.2 Step 2
    2
    Open the “MT_Card_Updater_1.3″ folder. You will see the “MT_Card_Updater v1.3.exe” file.
  3. 3
    Connect the MT-card 3ds flash card (yellow card) with your computer.
  4. Image titled Update MT Card to the Latest Hardware Ver1.3 & Software Ver1.2 Step 4
    4
    Run “MT_Card_Updater v1.3.exe”. Make sure the MT card is well connected to the computer while updating; don’t disconnect, or your MT card may be damaged if you disconnect.
  5. Image titled Update MT Card to the Latest Hardware Ver1.3 & Software Ver1.2 Step 5
    5
    Click “Update”. Then it’ll ask you if you’d like to update your mt card firmware v1.2 to v1.3.
  6. Image titled Update MT Card to the Latest Hardware Ver1.3 & Software Ver1.2 Step 6
    6
    Click the "Y" button to continue.
  7. Image titled Update MT Card to the Latest Hardware Ver1.3 & Software Ver1.2 Step 7
    7
    Just wait for the update to complete.
  8. Image titled Update MT Card to the Latest Hardware Ver1.3 & Software Ver1.2 Step 8
    8
    Copy “launcher.dat” into your SD card to replace the old one.
  9. 9
    Your upgrade is done!

Article Info

Categories: Hardware Maintenance and Repair