How to Set Up the Kbox Pro Digy (FTA Receiver)

Free-To-Air television is an excellent hobby that will keep you busy with endless hours of entertainment without monthly subscription payments.the Kbox K1 prodigy is one of the most versatile and advanced FTA receivers in the market. To install your kbox receiver properly, make sure you complete the following steps:

Steps

  1. 1
  2. Image titled Jstep2.JPG
    2
    From your remote controller, go to Menu --> Configuration --> System Recovery and select delete all channels, then select factory set. This will ensure that loading works properly.
  3. Image titled Jstep3.JPG
    3
    Insert the USB stick into the port in the front of the receiver, then go to Menu --> Utilities --> Data Transfer --> Data Download from USB Storage, then select the factory bin(version1.81)
  4. 4
    Go to Menu --> Configuration --> System Recovery and select factory set.
  5. Image titled Jstep5.JPG
    5
    Go to Menu --> Utilities --> Data Transfer --> Data Download from USB Storage, then select the latest bin(version 2.18 at time of writing)
  6. 6
    Go to Menu --> Configuration --> System Recovery and select factory set.
  7. Image titled Jstep7.JPG
    7
    Plug the khub into the receiver using the black serial cable, also plug in the network cable running to your router(or switch).
  8. Image titled Jstep8.JPG
    8
    From your remote controller go to Menu --> Utilities --> Data Transfer --> Data Download from USB Storage, then select the khub activation bin(khub.rom)
  9. Image titled Step9.JPG
    9
    Go to Menu --> Installation --> Option and make sure all AU options are set to off and Mode is set to Network
  10. Image titled Step10.JPG
    10
    Go to Menu --> Installation --> Dish Settings and configure the satellites you have setup the dishes for then press the red button on each satellite to scan in the channels.
  11. Image titled Step11.JPG
    11
    Go to Menu --> Configuration --> Network and change the mode to DHCP then press the green button on the remote and wait for it to complete
  12. 12
    Once the previous step has completed turn the receiver off with the remote, then from the back. Wait 30 seconds then turn the unit back on and everything should be working.(everything being all the currently working channels, not necessarily every channel in your list)

Tips

  • You will be asked for the passwords when you try to enter System Recovery, you can use the default passwords at the beginning time, it is: 000000

Warnings

  • Do not turn off the receiver when loading the bin file.

Sources and Citations

Article Info

Categories: Xbox