How to Set Up a Wireless Home Security System

If you are looking for a guide to install wireless home security systems, then you have landed in the right page. Here you will find a step by step guide on how to install a wireless home security system. Let’s have a look at them:


  1. 1
    Secure your windows. Another zone vulnerable to burglary is windows. Because there are several windows in a house, it could be expensive to place a sensor on every window.
    • As a substitute, you can put a motion sensor in every room, and then if anybody attempts to get in via the window, an alarm will be transmitted to the control panel.
  2. 2
    Set up the door sensor. The transmitters inside the door sensor have a restricted range. Ahead of installing any sensors, check out their function from the planned position to be certain they operate appropriately at that distance from the control panel.
    • The door sensor comes in 2 pieces – the bigger half is a wireless transmitter & the tinnier piece is a magnet that completes the circuit. As soon as the door unlocks, the circuit is broken & an alarm jingles.
  3. 3
    Set up the motion sensor. Motion detectors operate by sensing a transformation in temperature. Ignore pointing them in the direction of windows where the heat of the glass varies throughout cold and hot periods.
    • Though these sensors employ infrared technology to distinguish body temperature, small pets will not have an effect on their function since the sensors aren’t efficient enough to identify a body weighing less than forty pounds.
    • To set up the motion detector, 1st pick a location with a clear sight of the whole room. Utilize the mounting plate as a pattern to mark navigator holes, and affix the sensor to a firm base – employ drywall anchors in empty wallboard.
  4. 4
    Program the control panel. After all the sensors are installed, program the control panel. Plug-in the controller into an electric outlet & a phone jack.
    • Pursue the system’s programming methods cautiously – if you make any error, you may have to do again the whole progression. As soon as the system is programmed, it’ll jingle an alarm if a sensor is triggered, and it’ll call to aware you.
    • Turn on the window and door sensors while you move to bed, or depart the home. The water detector, freeze detector and smoke detector are always triggered.
    • Several systems offer a “keychain” remote control that users can carry and utilize to trigger the system with just a tap of a switch.


  • There are many reliable online retailers from whom you can find different types of home alarm systems to meet your need.

Article Info

Categories: Wireless Networking