How to Screen a Porch

Five Parts:Preparing the Porch AreaInstalling the Sill PlatesAdding the Screen FramesAttaching the ScreensApplying the Finishing Touches

While the task of screening a porch is one that does take some time and attention to detail, the process can usually be managed over the course of a weekend without much trouble. Requiring the use of a few basic hand tools and supplies, a porch screen installation involves preparing the porch itself followed by creating a framework that will support the screen. It is possible to screen a porch all by yourself, or manage the project with the help of a couple friends.

Part 1
Preparing the Porch Area

  1. Image titled Screen a Porch Step 1
    Clear the area. This involves removing all furniture and plants from the porch area. Doing so will create a safe work space that is free of hazards and will allow you to see all the details of the space that you might need to alter or work around.
  2. Image titled Screen a Porch Step 2
    Clean the floor and ceiling thoroughly. Having a clean, fresh space will make it much easier to identify any alterations that might be necessary before installing the frame and mounting the screening.
  3. Image titled Screen a Porch Step 3
    Install ceiling fixtures. Before beginning on the full porch screen, make sure to install any ceiling panels or ceiling fans you may want on your porch. Obviously, ceiling fans must be installed before ceiling panels to allow the wiring to be installed properly.
  4. Image titled Screen a Porch Step 4
    Remove old battens. Using a hammer and pry bar, remove any wood battens that may be attached to the existing porch frame.
    • A batten is simply a squared piece of wood or metal used to hold the frame in place.

Part 2
Installing the Sill Plates

  1. Image titled Screen a Porch Step 5
    Know the basics. Sill plates (also sometimes referred to as "sole plates") are usually just pieces of pressure-treated wood, often 2x4 lengths cut to measure, that are attached horizontally along the floor and ceiling of the porch area. Sill plates function as the base for the screen frame as they effectively create a network between the existing supports of the porch roof.
  2. Image titled Screen a Porch Step 6
    Create the sill plate perimeter. Install the wood around the perimeter of the porch, making sure the corners are square (you can use a framing square for this purpose).
    • On a wooden porch, the plates can be nailed into position. With a concrete porch, using a drill and masonry screws or a masonry nail gun will be required.
  3. Image titled Screen a Porch Step 7
    Add an extra layer. To provide a nice base for the interior trim work, attach another layer of untreated wood on top of the sill plate.[1]

Part 3
Adding the Screen Frames

  1. Image titled Screen a Porch Step 8
    Add the wall studs to the sill plate frame. The studs are heavier lengths of wood that attach to the porch walls, running vertically from the floor plates to the ceiling plates. As with the plates, nails can be used to affix the studs to a wooden structure, while a masonry nail gun or masonry screws are necessary to secure the studs to brick or other types of masonry walls.
  2. Image titled Screen a Porch Step 9
    Install the wall studs. Be sure to check the width of your screens. Most screens are three feet wide, so space your studs three feet apart, measuring from the center. [2]
    • Important: For door frames, use two wall studs on each side of the door. One for attaching the screen, and one for the door hinges.
  3. Image titled Screen a Porch Step 10
    Position and attach the balusters and rails within the screen frame. These are the horizontal pieces that help to provide stability to the overall frame. Use the measuring tape, chalk line, and level to make sure the rails and balusters are positioned properly before securing the pieces in place with the hammer and nails.
  4. Image titled Screen a Porch Step 11
    Attach all pieces together. Each individual frame piece needs to be screwed (or nailed) together. Make sure you attach the balusters to the rest of the frame to allow for maximum stability.
    • Once the rails and balusters are firmly affixed to the sole plates and wall studs, the frame is complete.

Part 4
Attaching the Screens

  1. Image titled Screen a Porch Step 12
    Cut the screens to size. Cut sections of screening to fill in the spaces within the framework. Make sure to leave a little excess to allow room for error.
  2. Image titled Screen a Porch Step 13
    Attach the screens. Begin at the top middle of the opening, and secure the screen using the staple gun. Working toward the outer area of the space, smooth the screen and staple at regular intervals. Make sure that the screening lays flat and is stretched taut as you go.
    • Once the top is secured, staple the sides and bottom, always stretching the screen to make sure it remains taut. Continue until the screen is firmly in place across the expanse of the framework.
  3. Image titled Screen a Porch Step 14
    Cut off the excess screen. Using a utility knife, trim off the extra edges of the screening material, outside of the the staples.
    • You might consider using more durable screening material on the bottom part of the screen, especially if you have pets who might rub up against the screen or scratch it with their claws.

Part 5
Applying the Finishing Touches

  1. Image titled Screen a Porch Step 15
    Cover up the seams. Use wood strips to hide the stapling along the frame, providing a more finished appearance. Consider attaching the strips using wood screws, since this will make it easier to remove the strips and replace a section of torn screen if necessary.
  2. Image titled Screen a Porch Step 16
    Paint or stain the wood. Consider painting or staining the visible wood of the porch (especially the pieces you just added) to match the rest of the house so that the color scheme flows seamlessly into the new porch addition.
  3. Image titled Screen a Porch Step 17
    Clean up and enjoy. Make sure you clean up the mess that inevitably accumulates during a project like this. Sweep the floor and return any plants or furniture that you previously removed. Then stand back and admire your handiwork!


  • Always use treated wood for the porch screen frame. This will minimize deterioration from exposure to changing weather conditions and keep repairs to a minimum.
  • Vinyl and metal screening are both options to screen a porch. Vinyl screening is usually less expensive but will tear relatively easily. If using metal screening, make sure it is treated to resist rusting due to the constant exposure to the elements.
  • Painting the sole plates, balusters, rails, and wood strips before the installation is a good idea. Even if they are scratched during the installation process, touching up the damaged areas with paint takes very little time and prevents the possibility of dripping paint on the screen mesh later on.

Things You'll Need

  • Vinyl or Metal Screening
  • Pre-cut Sole Plates
  • Pre-cut Rails
  • Pre-cut Balusters
  • Chalk Line
  • Level
  • Measuring Tape
  • Hammer
  • Nails
  • Drill
  • Wall Studs
  • Stud Screws
  • Staple Gun
  • Wood Strips

Article Info

Categories: Walls Fences and Decks