How to Replace a Craftsman Hassle Free Trim Line

If you just got a Craftsman Hassle Free weed whacker and you are having to replace the trim line, you may not be aware of how to change the line. It is very easy. Read on.

Steps

  1. Image titled Replace a Craftsman Hassle Free Trim Line Step 1
    1
    Turn your weed whacker over and take a look at it. If you look at the 'center' at the round piece.
  2. Image titled Replace a Craftsman Hassle Free Trim Line Step 2
    2
    Pull straight out on the round piece. You don't need to twist it or anything, just pull it out.
  3. Image titled Replace a Craftsman Hassle Free Trim Line Step 3
    3
    Pull out the old trim line and take your replacement line and put it into the same holes that you had removed it from.
  4. Image titled Replace a Craftsman Hassle Free Trim Line Step 4
    4
    Replace the round piece. It will take some elbow grease. One suggestion is to 'bounce' it on the sidewalk to get it to back in.

Tips

  • If you find your trim line is too thick, you might have gotten it for the wrong 'version' of weed whacker. You can still use it. Carefully drill the hole out just a little bit larger.

Article Info

Categories: Lawn Care