How to Play Cricket

Three Parts:Setting UpConcepts and RulesPlaying the Game

Cricket is one of the most popular games in the world, with billions of fans in the Subcontinent, the U.K., Australia, New Zealand and many other countries. Whether you've always wanted to play yourself, or just live somewhere (such as America) where cricket is less common and are curious to learn more about it, read the steps below to learn the basics of playing cricket.

Part 1
Setting Up

  1. Image titled Play Cricket Step 1
    Acquire equipment. Cricket requires a few pieces of specialized equipment to play with safety. At the bare minimum, six stumps, four bails, two cricket bats and a ball are required. Most teams also have uniforms, and safety gear for the wicket-keeper.
    • Stumps and bails are wooden pieces that are assembled to create the wicket, one of the most important objects in cricket. Setting up wickets is described in greater detail at the end of this section.
      Image titled Play Cricket Step 1Bullet1
    • The cricket bat is a large bat made of willow wood that is flat on one side and bulged on the other, for strength. The ball should be hit with the flat part of the bat for the best distance on a hit.
      Image titled Play Cricket Step 1Bullet2
    • The cricket ball is similar to a baseball in size and composition, but is sewn in a straight line rather than a tennis ball pattern, creating two equal hemispheres separated by stitching. Cricket balls are traditionally red with white stitching; in modern times, white balls are sometimes used for better visibility during Limited Over games (which generally go into the night), where coloured uniforms are worn rather than the traditional white.
      Image titled Play Cricket Step 1Bullet3
    • Cricket uniforms consist of long pants, a shirt (which may be long- or short-sleeved), and shoes. Most cricket players wear cleats (spike-tread shoes) for better grip on the field, but it isn't required. In games with a traditional red ball, outfits must always be white or off-white. Team colours may be used for games with white balls.
      Image titled Play Cricket Step 1Bullet4
    • The wicket-keeper (a ball catcher) is allowed to wear safety equipment similar to that of a baseball catcher's: webbed mitts, shin guards, and a helmet. No other player is allowed to wear protective equipment in the field unless they are close to the batsmen in which case they get to wear a helmet and shin guards.
      Image titled Play Cricket Step 1Bullet5
  2. Image titled Play Cricket Step 2
    Learn about the cricket field. Cricket is played on a large, oval-shaped field. The field has a rectangular strip in the center, which is called the pitch. A boundary line should be clearly marked all around the outside edge of the field.
    • The pitch is where the bowler (pitcher) bowls the ball to the other team's striker (batter). Regulation play has the pitch at 22 yards (20.1 m) long by 10 feet (3.0 m) wide.
      Image titled Play Cricket Step 2Bullet1
    • A cricket field doesn't strictly have to be oval according to the rules, but it usually is.
  3. Image titled Play Cricket Step 3
    Mark creases. Areas of the pitch are divided into segments by lines called “creases.” There are four creases:
    • The popping crease, which is also sometimes called the batting crease, marks the boundary beyond which the batter is no longer safe from being run out (taken out of play by the fielding, or defending, team).
      Image titled Play Cricket Step 3Bullet1
    • The two return creases run parallel to the long edges of the pitch, one on each side, back from the popping crease to the end of the pitch.
    • The bowling crease runs parallel to the popping crease between the two return creases, dividing the area behind the popping crease into two rectangular sections. The bowler must stand at or behind the bowling crease before he bowls.
    • Each end of the pitch is marked off with creases, leaving a rectangle of open space between them on the center of the pitch. Aside from the boundary marker, the rest of the cricket field is not marked.
  4. Image titled Play Cricket Step 4
    Set up wickets. A wicket is a structure made from three stakes, called stumps, driven into the ground, with two crosspieces called bails set on grooves between each pair of them (left-center and center-right). In most cases, a batsman whose wicket loses a bail from being struck with the ball, is out, so defending the wickets is an important part of offensive play.
    • Wickets should be set 28.5 inches (72.4 cm) high, with a total width of 9 inches (22.9 cm) across the three stumps.
      Image titled Play Cricket Step 4Bullet1
    • Wickets are placed so that the center stump of each wicket is in the center of the bowling crease, with the other two stumps equidistant on either side of it along the crease. One wicket is set up on each bowling crease, for a total of two on the pitch. Batsmen (batters) stand in front of their wickets during play.

Part 2
Concepts and Rules

  1. Image titled Play Cricket Step 5
    Learn the goal of the game. As in most field games, the goal of cricket is to score points against the opposing team by running from one point to another before the play can be ended or you're run out by the defenders, who are called the “fielding team.” The team at bat is called the “batting team.”
  2. Image titled Play Cricket Step 6
    Learn the basics of gameplay. Each team in cricket is comprised of 11 players. (An alternate 12th player may be held in reserve in case of injury, but is not otherwise used for anything.) At any given time, the fielding team has all 11 players on the field, whereas the batting team has two, called the batsmen. The batsmen try to hit the ball after it is bowled by the bowler for the fielding team, and then switch positions without getting an out to score points.
    • All of the positions on the pitch have official names. The person who bowls the ball is the bowler, and the batsman who is facing the bowler is called the striker. The other batsman, who stands near the bowler at the far side of the pitch from the striker, is called the non-striker. Finally, the fielding team member who stands behind the wickets at the striker's end of the field is called the wicket-keeper.
      Image titled Play Cricket Step 6Bullet1
      • Other positions in the field have colloquial names, but none are official.
  3. Image titled Play Cricket Step 7
    Learn the structure. Cricket, much like baseball, uses specialized terms to describe each section of the game. Depending on the length of the game to be played, the number of innings varies between one and two per team. Each innings (the word “innings” is used both singular and plural) can contain any number of “overs,” which are sets of bowls. Read the points below to learn about these elements in greater detail:
    • Every time the bowler bowls the ball, whether or not it is hit by the striker, a tally is counted. Once a bowler has bowled the ball 6 times in one direction, an “over” is declared. At the over, the bowler must be replaced with a new bowler. Bowlers can't bowl consecutive overs, but they can rotate back in after at least one bowl from another bowler, so theoretically two bowlers could trade off bowling for the entire innings. When there's an over, the position of the bowler changes from one end of the pitch to the other.
      Image titled Play Cricket Step 7Bullet1
      • This also means that the striker can change between overs, depending on which end of the pitch he is when the over is called. Strikers also change depending on how many runs are completed, since the bowler doesn't change position except at an over. For example, if only one run is completed, the striker and non-striker have switched ends of the pitch, making the non-striker the striker for the next bowl.
    • Any time a batsman is declared out, he must leave the field and be replaced by a teammate. If the fielding team manages to score 10 outs in an innings, the innings is over, as there are no more batsmen to fill in the second spot on the pitch. Ways to out a batsman are covered later.
      Image titled Play Cricket Step 7Bullet2
    • An innings is a single period of gameplay for the entire batting team. In short forms of cricket, a set number of overs are allowed to each team per innings; once that number is reached, the innings ends even if the fielding team hasn't made 10 outs. In the most prestigious and professional form of cricket, called Test cricket, any number of overs per innings is allowed, meaning that the innings normally only ends once 10 outs are reached. Once an innings ends, the fielding team and batting team switch roles, and the innings for the fielding (now batting) team begins.
      Image titled Play Cricket Step 7Bullet3
      • Test cricket games last a maximum of 5 days, and are played 6 hours a day during that time. The shortest commonly played form of cricket, Twenty20, allows one innings per team, with a maximum of 20 overs per innings, and typically takes no more than a few hours to complete.
  4. Image titled Play Cricket Step 8
    Learn the importance of the wickets. Wickets are a central part of cricket. One of the chief ways to out a batsman is to knock one or both of the bails off of his wicket with the ball, which is called “breaking” the wicket. There are several conditions under which this will result in an out:
    • If the bowler manages to directly hit the striker's wicket on a bowl and break it, the striker is considered out “bowled.”
      Image titled Play Cricket Step 8Bullet1
    • If a batsman is outside either popping crease on the pitch, the bowler may break his wicket, either by hitting it with the ball in his hand, or by hitting it with the ball directly. In this case, the batsman is said to have been “run out.”
      Image titled Play Cricket Step 8Bullet2
    • Since non-strikers often leave the popping crease as the bowler is about to bowl (in much the same way that baseball players edge away from bases in anticipation of a run to the next base), the bowler can out the non-striker by stopping the bowl and breaking the wicket before he returns to the crease. This is also considered a run out.
      Image titled Play Cricket Step 8Bullet3
    • If the striker misses the ball while attempting to hit it, and steps outside the popping crease, the wicket-keeper can break his wicket by catching the bowl cleanly and striking the wicket with the ball, resulting in an out. This type of out is called being “stumped.”
      Image titled Play Cricket Step 8Bullet4
    • If the striker intentionally uses any part of his body to block the ball from hitting the wicket, he is out “leg before wicket.” This is usually abbreviated LBW.
      Image titled Play Cricket Step 8Bullet5
    • If the striker hits his own wicket by accident and breaks it, he is out “hit wicket.” Hit wicket outs happen no matter what struck the wicket, but only happen if the striker was attempting to hit the ball, or has hit the ball and is attempting to run to the other end of the pitch.
      Image titled Play Cricket Step 8Bullet6
      • On the other hand, if the striker has hit the ball and it directly flies into the non-striker's wicket, the non-striker isn't out. The bowler can still pick up the ball and redirect it at the non-striker's wicket to run him out.
  5. Image titled Play Cricket Step 9
    Learn the other ways to out a batsman. In addition to the wicket, there are several other ways to out a batsman. Some of them are very common, while others happen rarely, if ever, at higher levels of play. Some of the more technical outs can only be decided by umpires, of which there are always 2 (and sometimes 3) on the field at any given time.
    • A striker is “caught out” if a member of the fielding team catches it before it hits the ground. This is a very common type of out. If the fielder who catches the ball steps over the boundary line at the edge of the field, though, the batsman scores 6 runs instead. This includes catching the ball out of bounds, and stepping over the line after the catch.
      Image titled Play Cricket Step 9Bullet1
    • If a batsman touches the ball with any hand not already holding the bat, he is taken out for “handling the ball,” unless the fielding team has given him permission first. This rule does not apply to getting hit by a bowled ball, or any other kind of accidental touching.
      Image titled Play Cricket Step 9Bullet2
    • When a batsman tries to use his bat or body to swat away a ball already in play (usually in defense of his wicket), or interferes with the efforts of the fielding team to get the ball back to the pitch and get an out, he is taken out for “obstructing the field.” However, running so that the batsman's body is between the fielder holding the ball and the batsman's wicket is legal.
      Image titled Play Cricket Step 9Bullet3
    • If the striker hits the ball twice on a bowl for any reason except to scoot it away from his wicket, he will be called out. Hitting the ball twice to confound fielders or attempt a better score is strictly forbidden.
      Image titled Play Cricket Step 9Bullet4
    • When one batsman is called out, if the next batsman doesn't arrive on the field to take his place within two minutes, he is considered “timed out.”
      Image titled Play Cricket Step 9Bullet5
  6. Image titled Play Cricket Step 10
    Learn about extra points. There are a few conditions under which extra runs can be awarded. These are noted as such for purposes of calculating player averages, but are otherwise identical to any other type of run for the purpose of determining a winner. The four types of extra are as follows:
    • On a call of “no ball” after an illegal bowl, batsmen can only be out by run out, handling the ball, obstructing the field, or hitting the ball twice. Runs scored on a call of “no ball” are considered extra, and every “no ball” a bowler throws must be compensated with another bowl in the same over. (Thus, a bowler who bowled “no ball” once would have to bowl a total of 7 times instead of the usual 6 to reach the over.)
      Image titled Play Cricket Step 10Bullet1
      • If no runs are scored on a “no ball,” one run is added to the batting team's score anyway.
    • When a bowler bowls wide (as discussed previously), the batting team automatically scores one run. As with “no ball” extras, “wide” extras must be made up by the bowler by adding bowls onto his over.
      Image titled Play Cricket Step 10Bullet2
    • If the striker tries to hit the ball but misses, and the wicket-keeper doesn't manage to catch it, the batsmen can try to score runs on the play. These runs are called “byes.”
      Image titled Play Cricket Step 10Bullet3
    • A “leg bye” occurs when the striker tries to hit the ball with his bat, but hits it with his body instead. “Leg byes” otherwise function identically to “byes.” “Leg byes” can't be taken if the striker wasn't trying to hit the ball.
      Image titled Play Cricket Step 10Bullet4

Part 3
Playing the Game

  1. Image titled Play Cricket Step 11
    Set up the pitch. One batsman stands at each end of the pitch, behind the popping crease but ahead of the bowling crease. The bowler also stands at one end of the crease, starting behind the bowling crease, and bowls to the other end. The batsman to whom the bowler bowls is the striker; the batsman at the same end as the bowler is the non-striker.
    • The wicket-keeper crouches behind the striker's wicket and the bowling crease. His job is to catch the ball should the striker miss or decline to hit the bowl. When the wicket-keeper successfully catches a ball, the striker is normally declared out.
      Image titled Play Cricket Step 11Bullet1
    • The other nine members of the fielding team can stand in any configuration at any time, as long as they stay outside the pitch.
      Image titled Play Cricket Step 11Bullet2
  2. Image titled Play Cricket Step 12
    Bowl the ball. The bowler starts behind the bowling crease, and bowls the ball before reaching the popping crease by moving forward and throwing the ball. A cricket bowl is always performed over-the-shoulder, with a completely straight arm. The ball is allowed to bounce on the pitch once before reaching the striker, though it doesn't have to.
    • If the bowler steps past the popping crease during the bowl, the play is called as “no ball” by the umpires. The batsmen can run as though they hit the ball, but can't be out except by a few specific methods, as outlined above.
      Image titled Play Cricket Step 12Bullet1
    • Different bowlers have different movement styles, and may rush forward for a fast bowl, or step forward a couple of times and twist for a trickier bowl. The fastest bowls can fly at up to 90 mph (140 km/h), which given the short length of the pitch, requires a very fast response from the striker.
      Image titled Play Cricket Step 12Bullet2
    • The bowl must reach the striker at or below the waist. If it's higher, or it sails out past the sides of the pitch, it is called a “wide” ball, or a “no ball,” especially in cases where the ball isn't far from the striker but is too high to hit.
      Image titled Play Cricket Step 12Bullet3
  3. Image titled Play Cricket Step 13
    Hit the ball and run. Using the flat side of the cricket bat, the striker can attempt to hit the ball. There are many different types of strike, each with a different advantage over the others. Once the striker has hit the ball, he and the non-striker can choose to run from end to end of the pitch, exchanging places. If both batsmen manage to run safely to the far side of the pitch, one run is declared, and one point is scored. If either batsman is declared out while trying to reach the far side of the pitch, no point is scored.
    • Batsmen don't have to run when they hit the ball. As long as they stay behind their popping lines, they're safe from most outs, so sometimes it's prudent not to run.
      Image titled Play Cricket Step 13Bullet1
    • Batsmen who successfully score a run can turn around immediately and try to score another run, as many times as they think they can get away with it before the fielding team can run one of them out. Taking more than 4 runs on a bowl is very rare, but possible.
      Image titled Play Cricket Step 13Bullet2
    • If a batsman hits the ball out of bounds and the ball bounced at least once on its way out, 4 runs are awarded automatically. If the ball didn't bounce before it landed out of bounds, 6 runs are awarded instead.
      Image titled Play Cricket Step 13Bullet3
  4. Image titled Play Cricket Step 14
    Finish the game. Play according to whatever type of game you've chosen until the appropriate number of innings has been reached. The team with the highest number of points is the winner.


  • There are many other minor rules and details to learn about cricket, to say nothing of cricket strategy. Use this guide as a starting point to learn the basics of the game, and then supplement your knowledge with information from more advanced sources.
  • Between plays, up to two minutes is allowed to the players to reset for the next play. This is a good time for the batsmen to confer with each other on strategy. If you're playing as a batsman, be sure to resume your position before the two minutes are up.
  • As a matter of course, cricket is always played during the summer, outdoors, and typically only between the hours of 1:00 PM and 6:00 PM. As a result, it can get very hot during the course of a game. Be sure to wear sunscreen and a hat, and drink plenty of water.
  • As you have learn little bit about cricket , Now you have to know your style , bowler or a batsman . If bowler so spinner or seamer , batsman right handed or left handed you should go read books about cricket rules .
  • When batting keep your elbow high when planing a shot.
  • You can bowl underarm or over arm, but if you are bowling over arm, make sure to keep your throwing arm straight.

Article Info

Categories: Cricket