How to Operate the SinoBaler Bottle Baler

SINOBALER manufactures and supplies various kinds of baling machines to suit for customers' specific baling needs. Look at how to operate bottle baler from SINOBALER.


  1. 1
    Press UP button to move the platen upwards and then open the material Feeding Door after the platen is on the top position
  2. 2
    Load material into the chamber room till it is fully filled into the chamber.
  3. 3
    Close and lock the Feeding Door by handle.
  4. 4
    Press DOWN button to activate the platen move downwards. The platen will automatically go upwards when it reaches the bottom limited switches
  5. 5
    Repeat the process from 2 to 4 for several times. Once the platen does not move upwards, it means that the bale has reached the biggest density within the capacity of this machine.
  6. 6
    Open the Chamber Door by pressing button OPEN. The door will be opened by hydraulic-driven.
  7. 7
    Go to the rear of the baler, lay out the strapping material (PP/PE/Steel wires) through the channel and strap bale.
  8. 8
    Go to the rear of the machine, hang up the chain on the hook that is at the back of the platen
  9. 9
    Press UP button to make the platen move upwards. The bale will be ejected out by the chain. (DO NOT STAND IN FRONT OF THE DOORS FOR SAFETY CONSIDERATION!)
  10. 10
    Press STOP button to stop the motor if you want
  11. 11
    Cut off the power if you do not use the machine

Article Info

Categories: Farming