How to Make a Xbox 360 Duct Tape Skin

Want to make a Xbox 360 duct tape skin. Here's how to do so.


  1. 1
    Cut 4-5 1 foot long pieces for the sides(do the same for the other side.)
  2. 2
    Overlap the 9-10 pieces of tape 1/4 of an inch.
  3. 3
    Cut 1/2 pieces of duct tape about 10 inches (25.4 cm) long.(then overlap them so the sticky sides touch each other.)
  4. 4
    Then cut 2 10 inch strips to connect step 2 with step 3.
  5. 5
    Then cut all the holes for the for the air vents so the Xbox 360 can ventilate properly.
  6. 6
    Make holes for the cords and the power button & disc tray and all the other holes.
  7. 7
    Last you can draw designs or leave it blank and there you have a skin for your Xbox 360.


  • Never stick the tape directly to the Xbox 360 will leave sticky marks!
  • Be careful with knife, blade, or scissors that you use to cut the tape!

Things You'll Need

  • Duct tape
  • Knife/blade/scissors
  • Xbox 360

Article Info

Categories: Pictures | Xbox 360