How to Make a Paintball Gun

One Methods:Load and Fire

Here is a way to make a very inexpensive paint ball gun.

Steps

  1. Image titled Make a Paintball Gun Step 1
    1
    Use electric tape to attach the pvc valve to the end of both 3/4 PVCs.
  2. Image titled Make a Paintball Gun Step 2
    2
    Make sure it's airtight.
  3. Image titled Make a Paintball Gun Step 3
    3
    Cut a hole in the end of the bottle the size of the end of the pump then tape the pump in the hole you made.
  4. Image titled Make a Paintball Gun Step 4
    4
    Put the other end of one of the PVC in the drinking hole of the bottle. tape it there.
  5. Image titled Make a Paintball Gun Step 5
    5
    Make sure all your "tape" is airtight.

Load and Fire

  1. Image titled Make a Paintball Gun Step 6
    1
    Close valve.
  2. Image titled Make a Paintball Gun Step 7
    2
    Pump
  3. Image titled Make a Paintball Gun Step 8
    3
    Put paintball down barrel.
  4. Image titled Make a Paintball Gun Step 9
    4
    To fire, open valve!

Tips

  • you can tape the pump to the gun and customise to your liking

Warnings

  • Do not over pump, the bottle may explode
  • DO NOT shoot people without paintball gear on

Thing's You'll Need

  • Two 3/4" pvc cut to 6"
  • 500 ml bottle
  • PVC valve
  • electric tape
  • small bike pump

Article Info

Categories: Paintball