How to Lay a Porcelain Tile Exterior Patio

When thinking about using porcelain tiles outdoors there are a number of important considerations to take into account. Firstly, and very importantly, porcelain tiles have different grades and you will need to check that your chosen tiles are Grade 5 i.e. suitable for outdoor use. Check with the supplier or manufacturer if you are unsure and double check that they are suitable for extremes of weather if that is relevant to where you live.

Steps

  1. Image titled Lay a Porcelain Tile Exterior Patio Step 1
    1
    A bonded cement/sand screed can be used to level the concrete substrate if necessary. To avoid problems with the screed shrinking (and causing the tiles to crack), allow it to dry out for 1 to 2 weeks. For minor surface irregularities simply use a levelling compound.
  2. Image titled Lay a Porcelain Tile Exterior Patio Step 2
    2
    Ensure the surface that you are laying the porcelain tiles on is as level as possible, clean and dry, and remove any loose particles.
  3. Image titled Lay a Porcelain Tile Exterior Patio Step 3
    3
    Select a "thin bed" adhesive for very flat surfaces with level differences of no more than 6mm. Otherwise select a "thick bed" adhesive.
  4. Image titled Lay a Porcelain Tile Exterior Patio Step 4
    4
    Always press the porcelain tiles firmly in place to avoid any air pockets forming underneath.
  5. Image titled Lay a Porcelain Tile Exterior Patio Step 5
    5
    Remove any excess adhesive from the tile surface immediately as it is difficult to clean off once dry.
  6. Image titled Lay a Porcelain Tile Exterior Patio Step 6
    6
    Allow the adhesive to dry for at least a day (longer in very cold weather) and protect from rain during the drying period if necessary.
  7. Image titled Lay a Porcelain Tile Exterior Patio Step 7
    7
    Once the adhesive is dry you can then apply the grout between the tiles; the type you choose is important because some grouts are only suitable for narrow joints but others for wide joints up to 20mm. Press the grouting well down into the joints so that no air pockets are created and remove the excess with a damp cloth. Again, leave to dry for at least a day, covering if it starts to rain.

Tips

  • Always allow plenty of drying time for the concrete base, any screed, the tile adhesive and the grout and protect from rain if necessary during the drying period.

Article Info

Categories: Landscaping and Outdoor Building