# How to Calculate Pi

Five Methods:Calculate Pi Using the Measurements of a CircleCalculate Pi Using an Infinite SeriesCalculate Pi Using Buffon's Needle ProblemCalculate Pi using a LimitArcsine Function/Inverse Sine Function

Pi (π) is one of the most important and fascinating numbers in mathematics. Roughly 3.14, it is a constant that is used to calculate the circumference of a circle from that circle's radius or diameter. It is also an irrational number, which means that it can be calculated to an infinite number of decimal places without ever slipping into a repeating pattern. This makes it difficult, but not impossible, to calculate precisely.

## Steps

### Method 1 Calculate Pi Using the Measurements of a Circle

- 1
**Make sure you are using a perfect circle.**This method won't work with ellipses, ovals or anything but a real circle. A circle is defined as all the points on a plane that are an equal distance from a single center point. The lids of jars are good household objects to use for this exercise.You should be able to calculate pi roughly because in order to get exact results of pi, you will need to have a very thin lead(or whatever you are using). Even the sharpest pencil graphite could be huge to have exact results. - 2
**Measure the circumference of a circle as accurately as you can.**The circumference is the length that goes around the entire edge of the circle. Since the circumference is round, it can be difficult to measure (that's why pi is so important).- Lay a string over the circle as closely as you can. Mark the string off where it circles back around, and then measure the string length with a ruler.

- 3
**Measure the diameter of the circle.**The diameter runs from one side of the circle to the other through the circle's center point. - 4
**Use the formula.**The circumference of a circle is found with the formula*C= π*d = 2*π*r*. Thus pi equals a circle's circumference divided by its diameter. Plug your numbers into a calculator: the result should be roughly 3.14.^{[1]} - 5
**For more accurate results, repeat this process with several different circles, and then average the results.**Your measurements might not be perfect on any given circle, but over time they should average out to a pretty accurate calculation of pi.

### Method 2 Calculate Pi Using an Infinite Series

- 1
**Use the Gregory-Leibniz series.**Mathematicians have found several different mathematical series that, if carried out infinitely, will accurately calculate pi to a great number of decimal places. Some of these are so complex they require supercomputers to process them. One of the simplest, however, is the Gregory-Leibniz series. Though not very efficient, it will get closer and closer to pi with every iteration, accurately producing pi to five decimal places with 500,000 iterations.^{[2]}Here is the formula to apply.**π = (4/1) - (4/3) + (4/5) - (4/7) + (4/9) - (4/11) + (4/13) - (4/15) ...**- Take 4 and subtract 4 divided by 3. Then add 4 divided by 5. Then subtract 4 divided by 7. Continue alternating between adding and subtracting fractions with a numerator of 4 and a denominator of each subsequent odd number. The more times you do this, the closer you will get to pi.

- 2
**Try the Nilakantha series.**This is another infinite series to calculate pi that is fairly easy to understand. While somewhat more complicated, it converges on pi much quicker than the Leibniz formula.**π = 3 + 4/(2*3*4) - 4/(4*5*6) + 4/(6*7*8) - 4/(8*9*10) + 4/(10*11*12) - 4/(12*13*14) ...**- For this formula, take three and start alternating between adding and subtracting fractions with numerators of 4 and denominators that are the product of three consecutive integers which increase with every new iteration. Each subsequent fraction begins its set of integers with the highest one used in the previous fraction. Carry this out even a few times and the results get fairly close to pi.

### Method 3 Calculate Pi Using Buffon's Needle Problem

- 1
**Try this experiment to calculate pi by throwing hotdogs.**Pi, it turns out, also has a place in an interesting thought experiment called Buffon's Needle Problem, which seeks to determine the likelihood that randomly tossed uniform elongated objects will land either between or crossing a series of parallel lines on the floor. It turns out that if the distance between the lines is the same as the length of the tossed objects, the number of times the objects land across the lines out of a large number of throws can be used to calculate pi. Check out the above WikiHow article link for a fun breakdown of this experiment using thrown food.- Scientists and mathematicians have not figured out a way to calculate pi exactly, since they have not been able to find a material so thin that it will work to find exact calculations.
^{[3]}

- Scientists and mathematicians have not figured out a way to calculate pi exactly, since they have not been able to find a material so thin that it will work to find exact calculations.

### Method 4 Calculate Pi using a Limit

- 1
**Firstly, pick a big number.**The bigger the number, the more accurate your calculation will be. - 2
**Then, plug your number, which we'll call x, into this formula to calculate pi:****x * sin(180 / x)**. For this to work, make sure your calculator is set to Degrees.

The reason this is called a Limit is because the result of it is 'limited' to pi. As you increase your number x, the result will get closer and closer to the value of pi.

### Method 5 Arcsine Function/Inverse Sine Function

- 1
**Pick any number between -1 and 1.**This is because the Arcsin function is undefined for arguments greater than 1 or less than -1. - 2
**Plug your number into the following formula, and the result will be roughly equal to pi.**- pi = 2 * (Arcsin(sqrt(1 - x^2)) + abs(Arcsin(x))).
- Arcsin refers to the inverse sine in radians
- Sqrt is is short for square root
- Abs is short for absolute value
- x^2 refers to an exponent, in this case, x squared.

- pi = 2 * (Arcsin(sqrt(1 - x^2)) + abs(Arcsin(x))).

## Tips

- Calculating pi can be fun and challenging, but doing so too deeply has diminishing returns. Astrophysicists say they only need to use pi to 39 decimal places in order to do cosmological calculations that are accurate to the size of an atom.

## Article Info

Categories: Mathematics