How to Apply Safety Floor Tape

Do you know how to make sure your employees are safe at any high-risk area inside the industry? Businesses or industries that have work spaces that put risk to the life or health of their employees should have safety standards as their top priority. Using a warning device such as a safety floor marking tape is one means to achieve this.

Order is a coveted trait in just about whatever institution, there are some spaces where organization is a main component of safety, and in fact the key to acquiring any work done. Workers in areas that have weighty and harmful equipment, these include hospitals, industries and laboratories, must be warned of probable peril in their surroundings by marking off areas and labeling objects. Signs and work memorandums have their place in maintaining order, but the best organizational tool in these instances would be a few quality rolls of safety floor tape. A straight forward and good system that would remind workers to take items to their correct places and to exercise caution in a number of areas is by using this simple marking device.


  1. Image titled Apply Safety Floor Tape Step 1
    Choose the material the tape is made of based on durability needs.
    • The cheapest type of tape that you can purchase is made of vinyl, whose strips are thinned away from bigger manufactured sheets. This means that the full surface of the tape is elevated slightly above floor layer, since the adhesive bed extends all the way out to the border, lifting the top vinyl layer over it. When heavy objects are pushed over the floor tape these causes little cuts and almost immediately wears it out.
    • In industrial places where surrounding conditions are tight due to the presence of weighty equipments or materials, there are stronger floor tape brands available made to resist these conditions.
      • A reinforced floor tape called Last Mark has a polyester material in between that strengthens it and prevents the tape from stretching if you twist it manually.
      • A floor tape with bevelled edges called Superior Mark is precisely as tough and allows any big item to slide over it without catching on the edges.
  2. Image titled Apply Safety Floor Tape Step 2
    Choose the appropriate colors. Color coding for safety floor tape has been enforced by the Occupation Safety and Health Administration agency that will direct workers when they see the tape, of a safeguard or safety standard that needs to be known.
    • Yellow, for example, is the base color for marking aisles and divisions between cells.
    • To indicate machines, materials and substances that pose danger to one's health, the color Red is marked to alert workers that caution is needed.
    • Red's opposite color, Green, in contrast, is used to mark locations where safety materials such as fire extinguishers and spillage showers are placed.
    • Orange is used to indicate out the presence of parts of machinery or energized equipment, near which employees are supposed to use precaution. For equipments that necessitate to be repaired, color Blue is marked on them to inform workers not to start the machines.
    • White is marked on a particular spot where internal objects like benches, carts and racks are stored.


  • Though safety floor tape is a terrific option for holding things organized on a busy floor, it is not necessarily the appropriate choice, principally for places with dense forklift traffic, where a lot of pushing and dragging of skids occurs. In these instances, it would be more proper to apply industrial markers rather than floor tape so that vehicles or heavy equipments can run through the lines without damaging them.

Article Info

Categories: Tools | Tradesman Occupations